设为首页 加入收藏

TOP

适用于乳酸菌蛋白裸酸奶等牛奶瓶包装的热收缩膜
2016-01-08 10:03:06 来源: 作者: 【 】 浏览:217次 评论:0
上海时达塑料包装制品有限公司向您隆重推荐一款适用于乳酸菌、蛋白裸酸奶等牛奶瓶包装的热收缩膜产品:PET乳白阻光膜



  
Technical Data Sheet
 
The statements contained herein are for informational purposes only and are true and accurate to the best of our scientific and technical knowledge. This information does not constitute a guarantee or warranty, express or implied, nor does it establish a legally valid contractual relationship. This information does not release the buyer from the obligation to examine the respective products by himself in respect of their suitability, including the suitability for the intended further processing. Revision: Rev02/2015-2-02/JE KlöcknerPentaplast (Suzhou) Specialty Materials Co., Ltd 
 
Product name: (产品名称) Pentalabel® Rigid PETG LF-TG10T32 – T52(opaque white film)
不透明乳白膜
Description: (产品描述) Rigid PETG for Shrink Sleeve Label application.
标签用的petg收缩膜
Oriented in Transverse Direction, Highshrinkage.
横向拉伸,高收缩率
Recommended for use in steam and hot air shrink tunnels.
建议在蒸汽和电加热收缩通道内使用
This film is one sided antistatic coated.
该膜在一面涂有抗静电涂层
Eliminates smiley effect through controlled MD growth.
通过纵向增长的功能可消除笑脸情况
Color颜色: opaque white 05G9201不透明乳白色
Surface表层效果: Gloss/gloss 100BA 光面/光面
Treatment: T52
  Properties 属性     Standard测试方法              Unit 单位 Typical Value  
  Thickness厚度 ASTM-D-374 μm 42  
  Thickness tolerance 厚度偏差范围 % ±10  
  Density 比重 ASTM-D-1505 g/cm³ 1.4  
  Density tolerance 比重偏差范围 % ±2  
  Material Yield 材料单位标准重量 ASTM-D-1505 m²/kg    
  42 μm   17.01  
  Dimensional stability TD 横向收缩率 ASTM-D-2732 95°C 30 s in water 95℃30秒的水浴 % -76  
  Dimensional stability TD tol.横向收缩率偏差范围 pp ±2  
  Dimensional stability MD 纵向收缩率 % -2  
  Dimensional stability MD tol. 纵向收缩率偏差范围 pp ±3  
  Tensile strength TD 横向拉伸强度 ASTM-D-882 v = 50 mm/min 50毫米/分钟 MPa 190  
  Tensile strength MD 纵向拉伸强度 MPa 43  
  E-Modulus TD  横向弹性模量 MPa 4700  
  E-Modulus MD 纵向弹性模量 MPa 1900  
  Gloss, 20° 光亮度 ASTM-D-523 GU 90  
  Haze 雾度 ASTM-D-1003 % 100  
             
 
Regulatory声明:
 KlöcknerPentaplast certifies that its rigid film and sheet products comply with the most recent package requirements for heavy metals of the Toxic Packaging Clearing House (TPCH, formerly CONEG) legislation and the requirements of the European Packaging Directive 94/62/EC, as well as European Union Directive 2011/65/EU (RoHS – Restriction of Hazardous Substances)
KlöcknerPentaplast保证其薄膜及片材产品符合有毒重金属包装结算(TPCH,之前为CONEG)法规和欧洲包装管理条例94/62/欧共体标准这些最新的包装要求,以及欧洲联盟管理条例2011/65/欧盟RoHS(–限制有害物质)
 KlöcknerPentaplast rigid films and sheet products do not contain any Ozone depleting substances, including those listed in the 1990 Clean Air Act Amendments.
KlöcknerPentaplast薄膜和片材产品不包含任何消耗臭氧层物质,包括1990进化空气法修正案中列出的物质。
 No BPA (bisphenol A), alkyl phenols (octyl and nonyl), alkyl phenol ethoxylates (octyl and nonyl), or butyl benzyl phthalates are used in the manufacture of this kp film.
Kp的薄膜不含有BPA(双酚A)、烷基酚(辛、壬基酚)、烷基酚聚氧乙烯醚(辛、壬基酚),或邻苯二甲酸丁苄酯成份
 
Storage conditions储存条件:
kp shrink films can be stored for up to 12 months. We guarantee film quality under the following storage conditions:
kp收缩薄膜存储可长达12月。我们承诺薄膜额质量只要在以下条件下储存:
 Do not store in temperatures above 29°C (85°F) or below 10°C (50°F)
不要存放在温度高于29°C(85°F)或低于10°C(50°F)
 Do not expose to rapid temperature changes
不暴露在温度变化大的环境下
 Do not store in direct sunlight
避免阳光直射
 Ideal storage humidity is 40-70 % RH
理想存储湿度为相对湿度40-70%
 Film should be conditioned a minimum of 24 hours at ambient room temperature before use
在使用前,确保薄膜在稳定的温度环境下最少放置了24小时
Store rolls in original packaging for dust protection
包装需完好以防粉尘
28
您看到此篇文章时的感受是:
Tags:适用于 乳酸菌 蛋白 酸奶 奶瓶 包装 收缩 责任编辑:zhujp
】【打印繁体】【投稿】【收藏】 【推荐】【举报】【评论】 【关闭】 【返回顶部
分享到QQ空间
分享到: 
上一篇E-PET 收缩膜简单介绍 下一篇EPET热收缩膜的技术指标物理性能

评论

帐  号: 密码: (新用户注册)
验 证 码:
表  情:
内  容:

相关栏目

最新文章

图片主题

热门文章

推荐文章

相关文章

广告位